beryllium bronze

1. Furthermore, beryllium bronze substrate energy transferring elements are found to be superior to steel substrate energy transferring elements.
   铍青铜基片换能结构要优于钢基片换能结构。
2. Company products are mainly divided into three categories: Explosion tools aluminum bronze, the two Beryllium Bronze material.
   公司产品主要分为三大类：防爆工具有铝青铜、铍青铜两种材质。
3. The Rapid-risen Temperature Model and Adaptive Control Method fot the Beryllium Bronze Vacuum Time-effective Furnace
   铍青铜真空时效炉快速升温模型及自适应方法
4. According to the mechanics property of the beryllium bronze and the structure of the part, the forming characteristics of the bending part is analyzed.
   从铍青铜的力学性能和零件的结构要求入手，分析了弯曲件的成形工艺特点。
5. Heat Treatment Defects of The Beryllium Bronze and Its Double Age-Strengthening
   铍青铜的热处理缺陷分析和双重时效强化
6. The Application of Beryllium Bronze to Die
   铍青铜在模具上的应用
7. This kind of alloy can be used as substitute for beryllium bronze to produce explosion-preventive alloy and electric equipment elements.
   指出该合金可用于代替铍青铜生产防爆合金及电器弹性元件。
8. Preparation and Tribological Properties of Cu/ Ni-P Multilayer Electrodeposited on Beryllium Bronze
   Cu/Ni-P多层膜的制备及其摩擦学性能研究
9. This article deals with the fractography of the beryllium bronze ( QBe2) between the preaging and the step aging in soft which are analyzed and compared by SME.
   本文用扫描电镜分析比较了QBe2合金标准软态时效与软态分级时效的断口形貌。
10. This alloy is cheaper and superior in the properties to beryllium bronze.
    与铍青铜相比，该合金性能优良、价格便宜，因此是一种很有发展前途的铜基弹性材料。
11. Pure copper ( T2) and beryllium bronze ( QBe2) were selected as the material to produce T2/ QBe2 composite by flat plate explosive cladding.
    本文选用工业纯铜（T2）和铍青铜（QBe2），采用平板爆炸复合方法制备T2／QBe2复合板。
12. According to the rule of aging deformation of beryllium bronze, the step ageing process of QBe 1.9 alloy diaphragm has been studied.
    本文根据铍青铜时效变形规律，对QBe1.9合金膜片的分级时效工艺进行了研究。
13. This paper deals with an investigation on superplasticity and dynamic recrystallization of beryllium bronze in a hardened state.
    本文研究了硬化态铍青铜（QBe~2）的超塑性与动态再结晶。
14. Factors effect combined performances of beryllium bronze
    影响铍青铜综合性能的因素
15. The process of vacuum solid solution treatment and double age-strengthening will effectively surmount the defects resulted from the common age and have proved to be an effective way to improve upon the quality of beryllium bronze.
    采用真空固溶和双重时效强化处理能有效地克服常规时效的不足，是提高铍青铜产品质量的有效途径。
16. A new paste material used to avoid deformation in aging of beryllium bronze parts
    铍青铜零件定形时效用的新材料842
17. Beryllium-containing bronze has usually been adopted to make elastic parts.
    铍青铜常被用于制造弹性零件。
18. Study on Strong Wrought Beryllium Bronze
    高强度变形铍青铜研究
19. High-speed camera and optical microscope were used to study the expanding fracture characteristic of the beryllium bronze ( QBe2) cylinder shell under detonation loading.
    利用高速摄影和金相分析研究了不同热处理状态的铍青铜（QBe2）柱壳在爆轰加载下的膨胀断裂特性。
20. Expanding Fracture of Beryllium Bronze Cylinder Shell
    铍青铜柱壳膨胀断裂研究
21. Spectrophotometric Determination of Beryllium in Bronze-Beryllium with Chlorophosphonazo ⅲ
    偶氮氯膦Ⅲ光度法测定铍青铜中铍
22. Optimization of Deformation Aging Process of Beryllium Bronze
    铍青铜形变时效工艺的优化
23. The Step Aging of Beryllium Bronze Diaphragm
    铍青铜膜片的分级时效
24. In this article, the design of the beryllium bronze cantilever with low elasticity and the wear-resistant probe are completed, finally built the experimental platform.
    完成了微位移测量系统中铍青铜材料、低弹性系数的悬臂梁和耐磨探针的设计，最后搭建了系统的实验平台。
25. In the mold manufacturing industry, the sliders and the guide plates are used widely standard parts, whose materials are high strength copper alloys, in particular, beryllium bronze ( QBe2) was widely used.
    在模具制造行业，滑块、导板是广泛使用的标准件，使用材质为高强度铜合金，尤其是铍青铜（QBe2）的使用量较大。
26. Completed the design of sensor, including the design of sensor structure and the design of flexibility component& beryllium bronze sheet. 3.
    完成了传感器设计，包括传感器的总体结构设计，弹性元件&铍青铜薄片的设计等。

noun

1. a copper-base alloy containing beryllium